ルーターにVPNが必要ですか?
今すぐExpressVPNを購入するExpressVPNを気に入りましたか?1ヶ月の無料サービスを獲得しよう
今すぐ友達に紹介This tutorial will show you how to set up MediaStreamer on your Netgear router.
MediaStreamer is a DNS service designed to improve your streaming experience. If your device doesn’t natively support VPN, MediaStreamer is a great alternative for streaming.
To use MediaStreamer smoothly, you must register your IP address on the ExpressVPN website. This allows ExpressVPN to recognize your IP address and grant your device access to MediaStreamer.
Note: MediaStreamer is not a VPN and does not offer the privacy and security benefits of a VPN. You cannot change locations with MediaStreamer.
The following steps were tested on Netgear Nighthawk R7000.
Jump to…
1. Register your IP address on the ExpressVPN website
2. Get your MediaStreamer server IP addresses
3. Change the DNS settings on your Netgear router
1. Register your IP address on the ExpressVPN website
Go to the ExpressVPN DNS settings page. If prompted, enter your ExpressVPN credentials and click Sign In.
Enter the verification code that is sent to your email.
Under IP address registration, click Register my IP address. If it already reads “registered” next to your IP address, there is no need to select this option again.
Toggle Automatically register my IP address on. This is recommended as it automatically tracks changes to your IP address.
If you have enabled Automatically register your IP address, you can keep your IP address updated by using the ExpressVPN app on your device or signing in to your ExpressVPN account occasionally.
Need help? Click here to contact the ExpressVPN Support Team via Live Chat
2. Get your MediaStreamer server IP address
Go to the ExpressVPN setup page. If prompted, enter your ExpressVPN credentials and click Sign In.
Enter the verification code that is sent to your email.
On the right, you will find the MediaStreamer DNS server IP address.
Keep this browser window open. You will need this information for the setup later.
Need help? Click here to contact the ExpressVPN Support Team via Live Chat
3. Change the DNS settings on your Netgear router
To access your router admin panel, go to 192.168.1.1 in your web browser. Sign in with your username and password (by default, both are admin).
If your router’s IP address was changed in the past and you cannot remember it, you can find it in your device’s settings.
On the main menu, click Internet.
Under Domain Name Server (DNS) Address, select Use These DNS Servers. For Primary DNS and Secondary DNS, enter the MediaStreamer IP addresses found earlier.
At the top, click Apply.
Your settings will be saved after the update is complete.
Need help? Click here to contact the ExpressVPN Support Team via Live Chat